The VIPerPlus series of high-voltage converters combines a 800 V avalanche-rugged MOSFET with a leading-edge PWM controller. With extremely low total standby consumption (less than 30 mW at 265 VAC)  and high efficiency over a wide load range, VIPerPlus devices enable SMPS designs meeting the most demanding energy saving regulations with enhanced reliability and scalability, and component count halved.

・The VIPerPlus*5 line provides the highest efficiency using a quasi-resonant topology.
・The VIPerPlus*6 line integrates a full set of smart features to meet the most advanced SMPS requirements, reducing the part count.
・The VIPerPlus*7 line features brown out and overvoltage protection for improved reliability.
・The VIPerPlus*8 line offers peak power capability to sustain 1 to 2 second overloads for enhanced robustness.

A plus in reliability
 800 V avalanche-rugged power MOSFET, thermal shutdown, soft start, short circuit protection, auto-restart

A plus in efficiency
 High efficiency over a wide range load and best-in-class in standby with less than 30 mW at 265VAC

A plus in integration
 Direct feedback, jittered switching frequency for low EMC, embedded HV start-up, embedded SenseFET MOSFET, clamp-less design

A plus in versatility
 Power scalability from a few watts up to 20 W, no aux winding, through hole or SMD packages, supporting all SMPS topologies

 

New VIPer35 quasi-resonant converter for 15 W SMPS

Introducing the VIPer35 high-voltage converter with quasi-resonant current mode PWM control that reduces switching losses, EMI level and external component count. To ensure high efficiency over a wide range of loads, the VIPer35 operates in Burst mode with light loads while an extensive set of protections – including brown-out, output overvoltage, short circuit and thermal shutdown with hysteresis – enables designs with enhanced robustness and reliability. Available with two switching frequency limit options (VIPer35L for 136 kHz and VIPer35H with 225 kHz) is the ideal choice for:
・Auxiliary power supplies
・Adapters/chargers for camcorders, shavers, or tablets
・Main power supplies for home appliances, STB, or industrial equipment

New VIPer0P with unique zero-power mode

Introducing the VIPer0P high-voltage converter with jittered fixed-frequency current-mode PWM control for simplified EMI compliance and zero-power mode (ZPM) with an astounding < 4 mW (at 230 VAC) consumption. VIPer0P can enter and exit ZPM when the low voltage input/output pins (OFF or ON) are pulled to ground so a small and inexpensive safety extreme low voltage (SELV) switch can replace the bulky mains switch. The VIPer0P embeds a set of protections – including over-current protection (OCP), VCC clamp, maximum duty cycle and flux runaway – to enable a more robust and safer SMPS design.

The VIPer0p is ideal for all SMPS up to 7 W having a wide input voltage range including:
・Home appliances compliant with EuP Lot6 energy regulation
・Industrial equipment or digital consumer goods

Explore all the key benefits of the VIPer0P high-voltage converter with unique zero-power mode with the STEVAL-ISA174V1 non-isolated, flyback 6 W SMPS evaluation board.

Visit Chip1Stop Chinese site
Visit Chip1Stop Korean site
Visit Chip1Stop English site
Visit Chip1Stop German site

Companies Website:
http://www.st.com/

STMicroelectronics News Release

• Quobly Forges Strategic Collaboration with STMicroelectronics to Accelerate its Quantum Processor Manufacturing for Large-Scale Quantum Computing Solutions

  2024/12/24STMicroelectronics  Processor/Memory

• STMicroelectronics introduces first STM32-ready wireless IoT modules leveraging collaboration with Qualcomm

  2024/12/24STMicroelectronics  IoT

• STMicroelectronics and ENGIE sign long-term agreement for the supply of electricity produced from renewable sources in Malaysia

  2024/12/13STMicroelectronics  Company / Market Trends

• Ampere and STMicroelectronics collaborate on powerbox with long term supply for silicon carbide

  2024/12/13STMicroelectronics  Company / Market Trends

• STMicroelectronics’ STGAP3S advanced galvanically isolated gate drivers feature flexible protection for IGBTs and SiC MOSFETs

  2024/12/12STMicroelectronics  Equipment and control components

Related News Release

• Miniature encapsulated AC/DCs have extended specifications

  2024/11/28  Recom  Power Supply

• STMicroelectronics’ unveils new STSPIN32G0 series of motor drivers for industrial applications and home appliances

  2024/11/18  STMicroelectronics  Power Supply

• SMD Power Modules Provide Flexible Gate Drive Bias Voltages

  2024/10/31  Recom  Power Supply

• STMicroelectronics reveals flexible, future-proof smart-meter communication solution for the energy transition

  2024/10/28  STMicroelectronics  Power Supply

• Bourns Releases Riedon™ Modular Fuse Blocks that Meet Class-T and ANL Requirements

  2024/10/08  Bourns  Power Supply