Chip One Stop - Shopping Site for Electronic Components and Semiconductors
Menu
Belgique
Change
English
SELECT YOUR LANGUAGE
USD
SELECT YOUR CURRENCY FOR DISPLAY
About Preferential Rank / Discount

Current price of Item(s) have been applied below.
 


・Preferential Rank and Discount rate will be applied according to your usage of our web service.
・Discount is only applicable to orders from chip1stop web site.
・Discounts may not be applicable to all products and may be subject to MOQ.
・Please contact your representative for details of Preferential Rank.
・No other coupons may be used in conjunction with this discount.

News Center

TI | Industry's first high-current PMBus converters with frequency synchronization reduce EMI

2015/08/17Texas Instruments  Power Supply

 

Description


The TPS544x25 devices are PMBus 1.2 Compliant, non-isolated DC-DC converters with integrated FETs, capable of high-frequency operation and 20-A or 30-A current output from a 5 mm × 7 mm package. High-frequency, low-loss switching, provided by an integrated NexFET power stage and optimized drivers, allows for very high-density power solutions. The PMBus interface enables the AVS through VOUT_COMMAND, flexible converter configuration, as well as key parameters monitoring including output voltage, current and an optional external temperature. Response to fault conditions can be set to either restart, latch-off or ignore depending on system requirements.

Features


PMBus 1.2 Compliant Converters: 20 A and 30 A
Input Voltage Range: 4.5 V to 18 V
Output Voltage Range: 0.5 V to 5.5 V
5 mm × 7 mm LQFN Package
Single Thermal Pad
Integrated 5.5-mΩ and 2.0-mΩ Stacked NexFET Power Stage
500-mV to 1500-mV Reference for Adapative Voltage Scaling (AVS) and Margining through PMBus
0.5% Reference Accuracy at 600 mV and Above
Lossless Low-Side MOSFET Current Sensing
Voltage Mode Control with Input Feed-Forward
Differential Remote Sensing
Monotonic Start-Up into Pre-Biased Output
Output Voltage and Output Current Reporting
External Temperature Monitoring with 2N3904 Transistor
Programmable via the PMBus interface
VOUT_COMMAND and AVS VOUT Transition Rate
Overcurrent Protection with Thermal Compensation
UVLO, Soft-Start and Soft-Stop
PGOOD, OV, UV, OT Levels
Fault Responses
Turn-On and Turn-Off Delays
Thermal Shutdown
Pin Strapping for Switching Frequency: 200 kHz to 1 MHz
Frequency Synchronization to an External Clock
Footprint Compatible 20-A, 30-A Converters

 

 


Visit Chip1Stop Chinese site
Visit Chip1Stop Korean site
Visit Chip1Stop English site
Visit Chip1Stop German site






Companies Website:
http://www.ti.com/

Texas Instruments News Release

Related News Release