PCN/PDN/NRND Information 2102771-1｜Chip One Stop - Mail order site for electronic parts and semiconductors

・Search based on multiple keywords and specs.

Enter all the keywords that are relevant to what you are looking for (e.g. category, manufacturer, specs) and our search engine will return all the parts related to your required conditions. Please enter your keywords in the box below
* Please separate each keyword in a new line

PCN/PDN/NRND Information

PCN (product/process change notification) and PDN (production discontinuation notification) information.

Notification Date	Notification Type	Notification Information
2024/03/20	PCN(Product Change Notice)	Reducing the wafer slot width of the shroud, from 0.45mm to legacy 0.36mm. This~change does not have an impact on performance and does not cause compatibility~issues. Previous change increased the slot width to 0.45mm but did not remove~the chamfered profile in the slot, which was later determine to be the root~cause of the FOD in our assembly process.
2024/06/24	PCN(Product Change Notice)	Supplier Notice No.:NOE-23-053#5 Title: STATUS CHANGE: Quality Alert / NOSP 23-053 – Notice of Suspect Product to NOE-23-053 – Notice of Escape In December 2023, TE Connectivity (TE) sent NOSP-23-053 to document a notification of suspect product. We are sending this update to inform you of a change in status. We regret to send this Notice of Escape (NOE) on Multigig Daughtercard connectors. Description of Non-Compliance: Through customer notification, we have identified that gold plating on the Printed Circuit Boards internal to the Daughtercard connectors may flake when adhesion testing (i.e., tape testing per IPC 6012E) is performed. Disposition of Non-Conformity: As a next step, we advise you to take the following actions with the non-conforming material: • Please quarantine at location and await further instructions TE
2024/09/13	PCN(Product Change Notice)	Supplier Notice No.:NOE-23-053#8 Title: NOE-23-053 – Multigig Daughtercard Connectors – Update Update Summary: •TE has expanded the scope of this Notice of Escape to date code range 2107 through 2408 •The root cause, failure mode, and corrective action remain the same •TE will provide a testing progress update on or before October 28, 2024 Description: This letter is an update to Notice of Escape (NOE) 23-053 on Multigig Daughtercard connectors. While the failure mode and corrective action have not changed, TE Connectivity (TE) has revised the date code range of affected connectors. Your organization may be receiving this notice for the first time because of this expanded investigation.
2024/10/03	PCN(Product Change Notice)	Supplier Notice No.:NOE-23-053#9 Title: NOE-23-053 – Multigig Daughtercard Connectors – Update Update Summary: •TE has expanded the scope of this Notice of Escape to date code range 2107 through 2408 •The root cause, failure mode, and corrective action remain the same •TE will provide a testing progress update on or before October 28, 2024
2024/11/15	PCN(Product Change Notice)	Supplier Notice No.:NOE-23-053#10 Title: NOE-23-053 – Multigig Daughtercard Connectors – Update Update Summary: •Our supplier is conducting tests to identify root cause of the PCB tape test failure reported in ourprevious update. We expect results in late November 2024. •Our supplier has provided on-site resources to 100% tape test current inventory of PCBs withTE supervision. No additional tape test failures have been identified to date. •Our Risk Assessment testing is ongoing. The planned completion date is December 12, 2024. •We will continue to supply parts that have been produced using 100% tape tested wafers and/ormaterial from an alternate supplier. Risk Assessment TE’s previously communicated risk assessment testing is ongoing, with a planned completion date of December 12, 2024. To date, we have not observed any flaking or identified performance issues against product specifications.
2024/12/06	PCN(Product Change Notice)	Supplier Notice No.:NOE-23-053#11 Title: NOE-23-053 – Multigig Daughtercard Connectors – Update Update Summary: •Our supplier has completed initial testing to identify root cause, and this testing wasinconclusive. Additional testing is in progress. We expect completion by December 13, 2024. •While the supplier’s root cause investigation is ongoing, TE has identified that the original issueis localized to a specific area of the PCB panel. We are reviewing samples from completed riskassessment testing to determine if additional testing is warranted. • Our supplier has completed their on-site assessment of TE’s current inventory of PCBs. Noadditional tape test failures were identified during this review. •Our risk assessment testing is complete. Results showed that product performed per the TEProduct Specification. •We will continue to supply parts that have been produced using 100% tape tested wafers and/ormaterial from an alternate supplier.
2024/12/20	PCN(Product Change Notice)	Supplier Notice No.:NOE-23-053#12 Title: NOE-23-053 – Multigig Daughtercard Connectors – Update Update Summary: •Our supplier has completed initial testing to identify root cause, and this testing wasinconclusive. Additional testing is in progress but was not completed by the December 13 targetdate stated in our previous letter. We will provide another update in January 2025. •Our risk assessment testing is complete. Results showed that product performed per the TEProduct Specification. A report describing the testing and results is available upon request. •Because tested product performed per the Product Specification, TE Connectivity (TE) isrecommending a use-as-is disposition.
Click here for contact regarding final purchasing

PCN/PDN/NRND Information

Notification Type

Notification Information

Notification Date

Products subject to notification

Manufacturer	Manufacturer Part Number	Last Time Buy	Successor Products

Product & Sales Information of products subject to notification

Shopping Guide

Products in stock are shipped any time after payment is completed.
If you need a quotation, please print it from your "shopping cart" or "order history".
Products out of stock will have a "Quote" button instead of an "Add to Cart" button. Please request a quotation first.

Payment Method ▼: NET 30 *1 / Credit card *2 / TT in advance / Alipay *3
*1 Application and approval required.
*2 Currently available for orders in JPY, USD, AUD, NZD, and EUR.
*3 Only available in China Mainland and Hong Kong.

Invoice total ▼: Merchandise total + Shipping fee

Shipping fee ▼: Customers are responsible for paying shipping fee and can select from the following methods:
1 Pay fixed cost to Chip One Stop*
2 Bill customer's shipper account number
*Click here for details.

Delivery ▼: Ordered products are shipped from our logistic center (in Yokohama, Japan) by a courier designated by the customer. All shipments are F.C.A. point of shipment from Chip One Stop warehouse.
The expected shipment date for back-ordered products is displayed based on the cutoff time for each order. Please check it in the search results.
A shipping notice with a tracking number will be emailed shortly after your shipment leaves Chip One Stop. The tracking number will be also stated on My Page.

About Icons/Product Information

Inventory Information ▼

: JP:Japan, HK:Hong Kong, US:United States
EU:Europe, AUS:Australia, Asia:Asia, NA:North America

Supplier Information ▼

: Sourced from manufacturers and authorized distributors

: Stocks of semiconductor sourced from authorized distributors

Product Information ▼

MOQ/SPQ

MOQ：: Minimum purchase quantity that can be ordered.
Please enter a number greater than the MOQ when ordering.

SPQ：: Number of units that can be ordered.
Please enter a quantity in multiples of the SPQ when ordering.

Reel Processing
It is a service that connects empty tape to both ends of a tape cut using a special tool, set the reel, and rewind it into the packaged form for delivery. It is made so that it can be set as is to a mounting machine. Processing is available from 100 pieces or more.
PCN/PDN Information
Information displayed when specification changes in PCN information (Product Change Notification) or PDN information (Product Discontinuance information) available.

Package type▼: Bulk:
Bulk is a package which the separete parts are packed in a bag, or packed individually.
Tape & Reel:
Tape & Reel is the unmodified original reel received from the manufacturer.
In case the MOQ is smaller than the manufacturer's standard package quantity, it will be cut tapes even if the package is shown as "Tape & Reel".
Cut tape:
Cut tape is a tape cut from an original reel. Cut tape does not contain a leader or trailer.
If you require a one continuous cut tape, please put your comment on your remarks.
For our supplier's stock, we are unable to ensure that the package will be one continuous cut tape even if you put your remark.

RoHS information ▼

: RoHS compliance: Compliant with 2011/65/EU (6 substances)

: RoHS2 compliance: Compliant with 2015/863/EU (10 substances)

Product Information ▼

: New Products released by manufacturers within 1 year

: New Products on Chip One Stop website within 3 months

SUN	MON	TUE	WED	THU	FRI	SAT
29	30	31	1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31	1

SUN	MON	TUE	WED	THU	FRI	SAT
26	27	28	29	30	31	1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	1

Bulk Search Function

・Search in bulk with your existing part list

・Search based on multiple keywords and specs.

About Preferential Rank / Discount

PCN/PDN/NRND Information

Product & Sales Information of products subject to notification