Chip One Stop - Shopping Site for Electronic Components and Semiconductors
Menu
Bulgaria
Change
English
SELECT YOUR LANGUAGE
USD
SELECT YOUR CURRENCY FOR DISPLAY
About Preferential Rank / Discount

Current price of Item(s) have been applied below.
 


・Preferential Rank and Discount rate will be applied according to your usage of our web service.
・Discount is only applicable to orders from chip1stop web site.
・Discounts may not be applicable to all products and may be subject to MOQ.
・Please contact your representative for details of Preferential Rank.
・No other coupons may be used in conjunction with this discount.

shindengen one stop

Shindengen is an overall manufacturer of power electronics that develops and produces power semiconductors, electrical products, power device products and new energy products. Chip One Stop allows you to make small-lot purchases of highly efficient and high performing power semiconductors and power device products.


Lightning Surge Protection Circuit

Select products by the circuit board you will use.

Lightning surge protection circuit

The surge protection element is a thyristor type semiconductor element that conducts by applying a specified voltage.
It is widely used as a lightning surge protection in communication equipment.
1 TSS: Thyristor type silicon surge protection element. It absorbs guided thunder superimposed on the communication line and protects communication equipment.

Symbol

Features
1 Fast response
Very fast operation against high pressure surge is possible.
2 Automatic recovery
The tyristor type surge protection element can design the holding current (IH) to be large and automatic circuit recovery possible.
3 Low junction capacitance (Cj)
It can be used for analog or digital communication systems.
4 Extensive lineup
The optimum product can be selected from the surge current rating 30~350A(10/1000µs)
5 Application example
The steep surge is absorbed by the surge protection element, and the surge of a particularly large energy can be effectirvely protected by using gas tube arrester (GDT) or zinc oxide varistor in combination.
Selection procedure
1 Determining the off voltage VDRM.
The off voltage VDRM is determined from the maximum power supply voltage VB applied to the device
2 Determining the clamping voltage VCL
The clamping voltage VCL is determined from the maximum withstand voltage of the circuit (IC, LSI) to be protected.
3 Determining the surge resistance ITSM
The surge capability ITSM of the device is determined from the supposed surge current waveform.
4 Determining the holding current IH
The circuit short-circuit current IL is obtained from the maximum power supply voltage VB and the circuit impedance RL and IL>HL is gauranteed as self-restoration operation after the surge protection element operation. (Check the temperature characteristic chart because the holding current IH has temperature dependence)
5 Confirming the junction capacitance
Consider the dull waveform with high frequency and confirm the junction capacitance Cj of the surge protection element.