New Products Compliant with JEDEC e・MMC™ Version 5.0

 

31 Oct, 2013

 

TOKYO—Toshiba Corporation (TOKYO: 6502) today announced the launch of new embedded NAND flash memory modules integrating NAND chips fabricated with 19nm second generation process technology. The module is fully compliant with the latest e•MMCTM [1] standard, and is designed for application in a wide range of digital consumer products, including smartphones, tablet PCs and digital video cameras. Mass production will start from the end of November.

Demand continues to grow for large density NAND flash memory chips that can support high resolution video and deliver enhanced storage. This is particularly true in the area of embedded memories with a controller function, which minimize development requirements and ease integration into system designs. Toshiba is meeting this demand by reinforcing its line-up of high density memory products.

 

The company’s new 32-gigabyte (GB) embedded device integrates four 64Gbit (equal to 8GB) NAND chips fabricated with Toshiba's cutting-edge 19nm second generation process technology and a dedicated controller into a small package measuring only 11.5 x 13 x 1.0mm. It is compliant with JEDEC e・MMCTM Version 5.0, published by JEDEC in September, and achieves a high read/write performance by applying the new HS400 high speed interface standard.

Toshiba will bring the NAND chips to a line-up of single-package embedded NAND flash memories in densities from 4GB to 128GB. All will integrate a controller to manage basic control functions for NAND applications.

 

New Product Line-up

Following 16GB and 32GB products, Toshiba will release 4GB, 8GB, 64GB and 128GB products in turn.

 

Key Features

1.   The JEDEC e•MMCTM V5.0 compliant interface handles essential functions, including writing block management, error correction and driver software. It simplifies system development, allowing manufacturers to minimize development costs and speed up time to market for new and upgraded products.

 

2.    Embedded in a system, the 128GB module can record up to 2,222 hours of music at a 128Kbps bit rate, 16.6 hours of full spec high definition video and 38.4 hours of standard definition video[2].

 

3.    The new products apply NAND flash memory chips fabricated with leading-edge 19nm second generation process technology.

 

4.    The new products are sealed in a small FBGA package measuring just 11.5 x 13mm and has a signal layout compliant with the JEDEC e•MMCTM V5.0.

 

Key Specifications

 

Note:

 

[1] e•MMCTM is a trademark and a product category for a class of embedded memory products built to the JEDEC e•MMCTM Standard specification.

[2]   HD and SD are calculated at average bit rates of 17Mbps and 7Mbps, respectively.

 

Information in the press releases, including product prices and specifications, content of services and contact information, is current on the date of the press announcement, but is subject to change without prior notice.

 

 

 

Toshiba Corporation- Semiconductor and Storage Products Company　Website＞

 

http://www.semicon.toshiba.co.jp/eng/index.html?mm=cp1031&no=03

 

Visit Chip1Stop Chinese site
Visit Chip1Stop Korean site
Visit Chip1Stop English site
Visit Chip1Stop German site

Companies Website:
http://www.semicon.toshiba.co.jp/eng/index.html?mm=cp1031&no=03

Toshiba News Release

• Toshiba Starts Test-Sample Shipments of a Bare Die 1200V SiC MOSFET with Low On-Resistance and High Reliability, for Use in Automotive Traction Inverters

  2024/11/13Toshiba  Automotive

• Toshiba Starts Sample Shipments of Gate Driver IC for Three-Phase Brushless DC Motors in Diverse Automotive Applications

  2024/11/01Toshiba  Automotive

• Toshiba Releases Automotive Photorelay with Output Withstand Voltage of 900V, Housed in a Small Package

  2024/10/28Toshiba  Automotive

• Toshiba’s 1200V Additions to its Lineup of Third-Generation SiC Schottky Barrier Diodes Will Contribute to High Efficiency in Industrial Power Equipment

  2024/09/26Toshiba  Power Supply

• Toshiba Is Sampling an Automotive CXPI Responder Interface IC that Contributes to Shorter Software Development Times

  2024/09/05Toshiba  Automotive

Related News Release

• Winbond’s LPDDR4/4X: A Green Solution for the Automotive Industry

  2024/11/29  Winbond Electronics  Processor/Memory

• STMicroelectronics reveals Page EEPROM two-in-one memory to boost smart-edge performance and efficiency

  2024/10/08  STMicroelectronics  Processor/Memory

• Winbond has unveiled its latest 1Gb QspiNAND for Wearable and Low-Power IoT Devices.

  2024/08/08  Winbond Electronics  Processor/Memory

• STMicroelectronics powers up the intelligent edge with second-generation STM32 microprocessors, bringing performance boost and industrial resilience

  2024/03/18  STMicroelectronics  Processor/Memory

• Winbond Introduces Innovative CUBE Architecture for Powerful Edge AI Devices

  2023/09/27  Winbond Electronics  Processor/Memory