Chip One Stop - Shopping Site for Electronic Components and Semiconductors
Menu
Switzerland
Change
English
SELECT YOUR LANGUAGE
USD
SELECT YOUR CURRENCY FOR DISPLAY
About Preferential Rank / Discount

Current price of Item(s) have been applied below.
 


・Preferential Rank and Discount rate will be applied according to your usage of our web service.
・Discount is only applicable to orders from chip1stop web site.
・Discounts may not be applicable to all products and may be subject to MOQ.
・Please contact your representative for details of Preferential Rank.
・No other coupons may be used in conjunction with this discount.

News Center

Toshiba Starts Mass Production of System Regulator IC with Monitoring Function for Electric and Hybrid Vehicles

2015/10/16Toshiba  Power Supply


October 15, 2015


Strengthened monitoring function contributes to safer vehicle systems
 

TOKYO– Toshiba Corporation's (TOKYO: 6502) Semiconductor & Storage Products Company today announced the mass production start of "TB9042FTG", a system regulator IC with monitoring function for the motor control system of electric and hybrid vehicles. The new IC is optimized for high efficiency systems, with a strengthened monitoring function to reduce potential risks that threaten the security of the system.
 

Failure of the system regulator IC leads to malfunction of electronic devices. The system particularly loses functionality when microcontroller (MCU) failure impacts on operation. "TB9042FTG" provides an SPI communication function to avoid this dangerous condition. The system regulator IC and the MCU identify trouble at the time of the abnormality by using the SPI communication function to monitor each other. Using the derived information, the system can carry out safe and timely processing.
 

Key Features


・Two DCDC converters and three series regulators are built in
・Various monitoring functions
-Continuous monitoring of the system regulators. (High output voltage, Low output voltage, Overcurrent, Overheat, Unusual frequency)
-Continuous monitoring of the MCU (Watchdog Timer, MCU alarm, MCU calculation function, Communication error)
-Self-diagnosis function
(High output voltage, Low output voltage, Output logic of each detection circuit)
・SPI communication[1] reports the monitoring state to external system
・When an unusual condition occurs, the output terminal immediately reports the monitored state to the external system. (Reset timer (RSTA/B), unusual voltage detection (NOVDET), MCU alarm (NOALM), All diagnosis result report (NDIAG)


Main Specifications

 


[1]: SPI (Serial Peripheral Interface) is a serial bus used for communications between the devices. The signal line comprises four lines, and it can communicate using fewer terminals than a parallel bus.


For further information about Toshiba's System Power Supply ICs, please visit:


http://toshiba.semicon-storage.com/ap-en/product/automotive/powersupply.html?mm=cp151016&no=03


*Information in this document, including product prices and specifications, content of services and contact information, is current on the date of the announcement but is subject to change without prior notice.


Toshiba Corporation- Semiconductor and Storage Products Company Website>


http://toshiba.semicon-storage.com/ap-en?mm=cp151016&no=04

 

 


Visit Chip1Stop Chinese site
Visit Chip1Stop Korean site
Visit Chip1Stop English site
Visit Chip1Stop German site










Companies Website:
http://toshiba.semicon-storage.com/ap-en?mm=cp151016&no=04

Toshiba News Release

Related News Release