Chip One Stop - Shopping Site for Electronic Components and Semiconductors
Menu
Germany
Change
English
SELECT YOUR LANGUAGE
USD
SELECT YOUR CURRENCY FOR DISPLAY
About Preferential Rank / Discount

Current price of Item(s) have been applied below.
 


・Preferential Rank and Discount rate will be applied according to your usage of our web service.
・Discount is only applicable to orders from chip1stop web site.
・Discounts may not be applicable to all products and may be subject to MOQ.
・Please contact your representative for details of Preferential Rank.
・No other coupons may be used in conjunction with this discount.

News Center

Highly integrated ultrasound transmitter from STMicroelectronics boosts image quality and shrinks form factor of handheld scanners

2022/10/14STMicroelectronics  Analog

Geneva, October 14, 2022 - STMicroelectronics has introduced a 64-channel ultrasound transmitter with new features to enhance the image quality and convenience of high-performance portable industrial and medical instruments.

Today's ultraportable scanners are almost the size of a smartphone yet deliver image quality comparable to large and expensive high-end systems from only a few years ago. ST's STHVUP64 transmitter, which drives the instrument's piezoelectric transducers, is powering the next stage in this evolution by adding extra flexibility, digital beam steering, and space-saving innovations.

With 64 channels, the STHVUP64 delivers a highly integrated solution aimed at the handheld, wireless scanner segment. It can drive up to 256 probe elements directly, eliminating expensive, high-voltage switches usually needed between the transmitter and probe. Designers can thus reduce the bill of materials and take advantage of space savings inside the handset.

The STHVUP64 also introduces a new 5-level output capability, in addition to the common 3-level output, which enhances flexibility to optimize the picture quality. High current delivery, up to ±400mA from the STHVUP64, allows driving the transducers at high speed to enable multiple imaging modes. The high drive strength also helps achieve pulse duration as short as 5ns that enhances control of the transducers to maximize image detail. The transmitter supports continuous wave (CW) and pulsed wave (PW) operating modes to allow various types of analysis including cavities and liquid flow.

In addition, digital beam steering enhances directional control by permitting greater precision than conventional analog steering using delay circuits. By integrating the logic on-chip, the transmitter can be used without a companion chip such as an FPGA dedicated to beam steering. This saves PCB space and routing complexity, as well as bypassing FPGA-design challenges.

Also new, the transmitter has a self-biased driver architecture that eliminates any need for the power-supply decoupling capacitors that are typically placed outside the chip. This helps ensure a smaller circuit footprint, as well as lowering the bill of materials (BOM). In addition, it is housed in a smaller package than comparable alternative ICs thereby giving designers greater flexibility to create next-generation products in even smaller form factors.

While having extremely low power consumption, which is key for battery power supply systems, the STHVUP64 is richly featured for a superior user experience. There is on-chip memory for storing transmission patterns, and synchronization is possible using a clock signal up to 200MHz to enhance image quality by minimizing jitter. The IC also provides a communication port that supports multiple CMOS signaling standards, as recommended for today's highest system-clock signal frequencies.

Built-in protection includes noise blocking, thermal protection, under-voltage protection, and recirculating current protection. There is also a diagnostic register that allows reading the causes of interrupts directly to ease debugging in the event of a malfunction.

The transmitter is built using ST's proven BCD8s-SOI technology that supports analog (bipolar), digital (CMOS), and power (DMOS) circuits on the same die. It's in production now, in a 10mm x 10mm x 1.4mm 196-ball
FC-BGA196 package, and available from $90.00 for orders of 1,000 pieces.


About STMicroelectronics
At ST, we are 48,000 creators and makers of semiconductor technologies mastering the semiconductor supply chain with state-of-the-art manufacturing facilities. An integrated device manufacturer, we work with more than 200,000 customers and thousands of partners to design and build products, solutions, and ecosystems that address their challenges and opportunities, and the need to support a more sustainable world. Our technologies enable smarter mobility, more efficient power and energy management, and the wide-scale deployment of the Internet of Things and connectivity. ST is committed to becoming carbon neutral by 2027.


Companies Website:
https://www.st.com/content/st_com/en.html/

STMicroelectronics News Release

Related News Release