Bourns Releases New Gas Discharge Tube Model 2030 T-Series chip one stop

News Center

Bourns Releases New Gas Discharge Tube Model 2030 T-Series

2012/05/25Bourns Passive / Connections / mechanical parts

May, 2012

Bourns is pleased to announce the release of the Model 2030 T-Series fast response Gas Discharge Tubes (GDTs) designed for use with the Bourns® TBU® High Speed Protectors (HSPs).

The newly released part numbers and specifi cations are:

Part Number 2030-23T
DCBD 185 V
Size 5 x 7.3 mm
5 kV 1.2 x 50 μs Impulse Voltage 650 V
Used with TBU® HSP Series TBU-CA065

Part Number 2030-42T
DCBD 360 V
Size 5 x 7.3 mm
5 kV 1.2 x 50 μs Impulse Voltage 850 V
Used with TBU® HSP Series TBU-CA085

The 2030 T-Series is a three element GDT that provides superior protection against fast rising voltage transients. GDTs on the market today commonly specify their impulse limiting performance at a 1k v/μs rate of rise. The T-series specifi es its impulse limiting performance at a very fast 5 kV, 1.2 x50 μs making it ideally suited for use with the TBU® HSP.

The 2030 T-Series and TBU® HSP provide a superior protection solution for a broad number of industrial applications as well as telecom applications requiring GR-1089 or ITU-T K.21 compliance. These GDT devices provide coordinated overvoltage protection for the specifi ed TBU® HSP protector models shown in the above table. Together, the GDT and TBU® High-Speed Protectors provide extremely fast overcurrent protection (OCP) and overvoltage protection (OVP) against electrical transients. When exposed to a transient event, the TBU® HSP will transition into a currentblocking condition in less than one microsecond at the rated current. When needed, the GDT will transition into conduction at a voltage below its maximum impulse rating, protecting the TBU® HSP from overvoltage and shunting the excess surge energy to ground. Once the transient subsides, the GDT and TBU® HSP will reset to their normal off-state modes of operation.

The new models are available as RoHS compliant*. The product data sheets with detailed specifi cations can be viewed on the Bourns website at www.bourns.com. Please contact your local Bourns Representative or Bourns Customer Service for samples or for further information.

Companies Website:
http://components-asiapac.arrow.com/en/new_product/4505/

Bourns Click here to purchase

Bourns News Release

Bourns Releases Riedon™ Modular Fuse Blocks that Meet Class-T and ANL Requirements
2024/10/08Bourns Power Supply
Bourns Introduces Low Profile, High Creepage Isolation Transformer for Gate Drive and High Voltage Battery Management Systems
2024/10/04Bourns Power Supply
Bourns Announces IEC Class I and Class II AC Surge Protective Devices
2024/10/03Bourns Power Supply
Bourns’ New AEC-Q200 Compliant, Automotive-Grade Thin Film Chip Resistors Offer Higher Resistance Tolerance Accuracy and TCR
2024/10/03Bourns Passive / Connections / mechanical parts
Bourns Unveils IEC Class I and Class II DC Surge Protective Devices Designed to Protect DC Power Systems up to 1500 VDC
2024/10/03Bourns Power Supply

SUN	MON	TUE	WED	THU	FRI	SAT
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30	31	1	2	3	4

SUN	MON	TUE	WED	THU	FRI	SAT
29	30	31	1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31	1

・Search in bulk with your existing part list

・Search based on multiple keywords and specs.

News Center