128-Channel Digital X-Ray Analog Front End 2012/07/27 Analog Devices
Analog
The AD8488 is a 128-channel, analog front end (AFE) designed for use in high performance digital X-ray systems. The analog channels consist of an integrator followed by a gain selectable single-ended to low impedance differential output. The analog channel converts the charge acquired by X-ray or photodiode detectors to a voltage. The channels are composed of CMOS transistors, using typical high input impedance CMOS gates. The integrators generate charge dependent voltages using a range of selectable capacitance values that accommodate a broad range of input charge values. The integrators are followed by single-ended input to differential output voltage amplifiers where offset and low frequency noise voltages are subtracted from the input voltages. A 128:1 channel differential MUX follows the buffers and drives the analog output buffer. Switch drivers and certain digital timing functions are included, and all are mounted on a 255-lead BGA substrate. Charge conversion for all 128 channels is simultaneous followed by a sequential voltage output read of the channels using a 7-bit address code. The sequence occurs twice, sampling all 128 channels. Logic control inputs, CS_A and CS_B, select the lower and upper 64 blocks of the channel addresses.
The AD8488 is packaged in a 17 mm × 17 mm, 255-lead, RoHScompliant ball grid array (BGA). The operating temperature range is 0°C to 85°C ambient.
Companies Website:
http://components-asiapac.arrow.com/en/new_product/4779/
Analog Devices News Release
2015/02/13 Analog Devices
Power Supply
2015/01/23 Analog Devices
Analog
2014/12/17 Analog Devices
Analog
2014/10/10 Analog Devices
RF & Micro Wave
2014/09/16 Analog Devices
Analog
Related News Release
2024/12/03
STMicroelectronics
Analog
2024/09/30
STMicroelectronics
Analog
2024/04/23
STMicroelectronics
Analog
2024/04/02
STMicroelectronics
Analog
2024/03/18
STMicroelectronics
Analog