April 14, 2016

TOKYO– Toshiba Corporation's (TOKYO: 6502) Storage & Electronic Devices Solutions Company today announced the launch of "TB9150FNG," an opto-isolated IGBT *1 gate pre-driver IC with various enhanced protective functions for the in-vehicle inverters of electric and hybrid vehicles.

Sample shipments start today, with mass production scheduled to start in 2018. The IC will be showcased at "TECHNO-FRONTIER 2016" to be held from 20 to 22 April at Makuhari Messe in Chiba, Japan.

Inverter control is used to drive the motors of electric and hybrid vehicles efficiently. As the control and drive functions have different operating voltages, they must be isolated from each other, which is secured with a device like a photocoupler. This solution results in loud noise from the drive circuit. Another concern is that efficient IGBT driving requires small, versatile, high performance IGBT gate pre-driver ICs with built-in protective functions.

Toshiba "TB9150FNG" integrates a photocoupler that secures high-level isolation characteristic between control (the primary side) and drive (the secondary side). It incorporates a highly-precise IGBT temperature detection function, a flyback transformer controller and a short circuit detection function (current sense and DESAT *2 monitor) that all contribute to system downsizing.

Performance can be optimized by monitoring the IGBT’s operating temperature with the high accuracy IGBT temperature detection function, contributing both to downsizing of the IGBT and improved fuel consumption by electric and hybrid vehicles.

Main Features
1. Optical isolation function
Electrical isolation and high-withstand voltage isolation are achieved by a built-in photocoupler for communication between the primary and secondary sides. The perfect isolation this achieves secures a high tolerance to exogenous noise, such as that caused by electro-magnetic susceptibility.

2. Highly precise temperature detection function
The new IC has the constant current source for a temperature sense diode incorporated in IGBT and the AD converter. It measures voltage inside the temperature sense diode with high accuracy, allowing temperature to be precisely calculated.

3. Built-in flyback transformer control circuit for the power supply
A flyback transformer control circuit in the primary side supplies power to the secondary side while maintaining isolation. It also has a soft-start function that secures smooth start-up when turning on power to the circuit, avoiding current overload.

4. Various built-in abnormality detection circuits and protection circuits
The power supply, output, current and voltage of the IGBT are all monitored. Information on any detected abnormality is transferred to the main controller part via an SPI interface. A dedicated circuit provides protection against any abnormality with the potential to destroy the IC and IGBT.

5. Based on AEC-Q100 standards

Main Specifications

 

*1: Insulated Gate Bipolar Transistor: A bipolar transistor that incorporates a MOSFET into a gate. Used for electric power control.

*2: DESAT: desaturation.

For more information about Toshiba automotive devices, please visit:
http://toshiba.semicon-storage.com/ap-en/product/automotive.html?mm=cp160415&no=03

*Information in this document, including product prices and specifications, content of services and contact information, is current on the date of the announcement but is subject to change without prior notice.

Toshiba Corporation- Semiconductor and Storage Products Company　Website＞
http://toshiba.semicon-storage.com/ap-en?mm=cp160415&no=04

 

 

Visit Chip1Stop Chinese site
Visit Chip1Stop Korean site
Visit Chip1Stop English site
Visit Chip1Stop German site

Companies Website:
http://toshiba.semicon-storage.com/ap-en?mm=cp160415&no=04

Toshiba News Release

• Toshiba Starts Test-Sample Shipments of a Bare Die 1200V SiC MOSFET with Low On-Resistance and High Reliability, for Use in Automotive Traction Inverters

  2024/11/13Toshiba  Automotive

• Toshiba Starts Sample Shipments of Gate Driver IC for Three-Phase Brushless DC Motors in Diverse Automotive Applications

  2024/11/01Toshiba  Automotive

• Toshiba Releases Automotive Photorelay with Output Withstand Voltage of 900V, Housed in a Small Package

  2024/10/28Toshiba  Automotive

• Toshiba’s 1200V Additions to its Lineup of Third-Generation SiC Schottky Barrier Diodes Will Contribute to High Efficiency in Industrial Power Equipment

  2024/09/26Toshiba  Power Supply

• Toshiba Is Sampling an Automotive CXPI Responder Interface IC that Contributes to Shorter Software Development Times

  2024/09/05Toshiba  Automotive

Related News Release

• STMicroelectronics releases standard-threshold 40V MOSFETs in enhanced STripFET F8 technology

  2024/12/26  STMicroelectronics  Power Supply

• 250W MasterGaN reference design from STMicroelectronics fast-tracks compact, efficient industrial power supplies

  2024/12/25  STMicroelectronics  Power Supply

• Miniature encapsulated AC/DCs have extended specifications

  2024/11/28  Recom  Power Supply

• STMicroelectronics’ unveils new STSPIN32G0 series of motor drivers for industrial applications and home appliances

  2024/11/18  STMicroelectronics  Power Supply

• SMD Power Modules Provide Flexible Gate Drive Bias Voltages

  2024/10/31  Recom  Power Supply