Molex Partners with Altera and Gennum to Demonstrate 100 Gbps Enabling Technology at OFC/NFOEC 2012/04/20 Molex
Company / Market Trends
Test of 28 Gbps system provides the roadmap to next-generation interconnect technology
LISLE, Ill. – March 2, 2012
Molex Incorporated will partner with Altera Corporation and GennumCorporation to demonstrate interoperability of a 28 Gbps Very Short Reach (VSR) interconnect solution atOFC/NFOEC, March 6 – 8. The companies are using this opportunity to illustrate their commitment to helping system engineers and manufacturers develop higher density and lower power optical networks.The demonstration will take place during the Optical Internetworking Forum (OIF) Interoperability 2012 –Enabling High-Speed Dynamic Services multi-vendor showcase in booth 713.
“By successfully demonstrating interoperability of a 28 Gbps system, Molex and its partners Altera and Gennum, are paving the way for next-generation, high-speed connectivity,” said Scott Sommers, group product manager, Molex. “This is a critical step in meeting the high-performance needs of future bandwidth-intensive communications systems.”
The demonstration will test the 28 Gbps transmission technology over 2km of singlemode fiber utilizing Molex’s silicon photonics based transceiver and zQSFP+ Interconnect System. The channel will include PRBS31 data at 28.05 Gbps within the Altera Stratix V® GT FPGA, which is tailored to support the most bandwidth-intensive communications systems. The data is then transmitted over a GennumVSR host channel with 12 dB of insertion loss, through a Molex zQSFP+ connector to Gennum clock and data recovery (CDR) integrated circuits. The retimed outputs of the CDRs are transmitted to the Molex 1490nm 4x28G Optical Transceiver Module, which loops the optical data back to its receiver through 2km of singlemode fiber. In the receive direction, the data flow is in the reverse order through the cascaded blocks, ending at the PRBS31. The error checkers within the Altera FPGA will verify that the entire transmit and receive data path through the system is operating error free. An electrical data eye is shown on a Tektronix DSA8300 Digital Sampling Oscilloscope at one of the Gennum CDR outputs.
The zQSFP+ system from Molex supports next-generation 100 Gbps Ethernet and 100 Gbps InfiniBand*Enhanced Data Rate (EDR) applications with excellent thermal cooling, signal integrity (SI),electromagnetic interference (EMI) protection and the lowest power consumption in the industry.
Altera’s Stratix V FPGAs deliver the highest system bandwidth at the lowest power consumption, under 200mW per transceiver at 28 Gbps. Stratix V FPGAs support backplane, chip-to-optical module, and chipto-chip applications through 28 Gbps transceivers, and up to 66 full-duplex 14.1 Gbps transceivers. The transceivers in Stratix V FPGAs provide the industry's highest system reliability and performance with thelowest jitter.
By resetting the jitter budgets within the module in both the transmit and receive directions, Gennum’s CDRs enable robust operation for new systems such as Nx25G active optical cables and 100GBASELR4/ER4 and OTU4 optical modules. In the transmit direction they provide laser drivers with very low-jitter signals, allowing clean, wide-open transmit eyes. In the receive direction they remove jitter from the recovered optical signals, promoting error-free reception by a downstream ASIC receiver on the host board. The GN2425 and GN2426 CDRs include equalization capabilitybeyond that demanded of the new CEI-28G-VSR IA, providing a robust VSR link.
To learn more about the Molex zQSFP+ system visit www.molex.com/link/zqsfp+.html . To receive information on other Molex products and industry solutions, please sign up for our e-nouncement newsletter at www.molex.com/link/register/ .
About Molex Incorporated Providing more than connectors, Molex delivers complete interconnect solutions for a number of markets including data communications, telecommunications, consumer electronics, industrial, automotive,medical, military and lighting. Established in 1938, the company operates 40 manufacturing locations in 16 countries. The Molex website is www.molex.com . Follow us at www.twitter.com/molexconnectors,watch our videos at www.youtube.com/molexconnectors , connect with us at www.facebook.com/molexconnectors and read our blog at www.connector.com .
OIF Interoperability 2012 Ten companies, including Altera, Gennum and Molex, will unite under the banner of the OpticalInternetworking Forum to showcase multi-vendor participation in OIF Interoperability 2012 –Enabling High-Speed Dynamic Services. The OIF’s PLL demonstration will showcase the draft CEI-28G-VSR implementation agreement, featuring host ASICs with VSR SERDES, host PCB traces, optical module connectors, module retimers and optical transceivers.
A public demonstration of the interoperability test will be on display March 6-8, 2012 at OFC/NFOEC in Los Angeles, CA, OIF Booth #713. Additional information can be foundhttp://www.oiforum.com/public/OIF_at_OFC2012.html
# # # Molex is a registered trademark of Molex Incorporated. * InfiniBand is registered trademark of Infiniband.
Companies Website:
http://components-asiapac.arrow.com/en/new_product/4374/
Molex News Release
2015/08/14 Molex
Passive / Connections / mechanical parts
2015/04/21 Molex
Company / Market Trends
2015/04/21 Molex
Passive / Connections / mechanical parts
2015/03/24 Molex
Passive / Connections / mechanical parts
2015/02/13 Molex
Passive / Connections / mechanical parts
Related News Release
2024/12/13
STMicroelectronics
Company / Market Trends
2024/12/13
STMicroelectronics
Company / Market Trends
2024/11/26
STMicroelectronics
Company / Market Trends
2024/11/01
STMicroelectronics
Company / Market Trends
2024/10/11
STMicroelectronics
Company / Market Trends