Provides an easy-to-use and low-cost solution for accurately verifying crimp quality in the field

 

Singapore – October 22, 2012 – Molex Incorporated today announced its Hand-Held Wire Crimp Pull-Force Tester, a manual, hand-operated digital pull tester that delivers accurate pull-force readings required to verify crimp quality. Ideal for contract manufacturers and harness houses, the Hand-Held Wire Crimp Pull-Force Tester from Molex measures accurate pull strengths on a wide range of crimped terminals and wires, providing consistent verification of crimp pull force and reducing potential quality issues.

“Our Hand-Held Wire Crimp Pull-Force Tester can be used in any situation requiring a portable solution to verify crimp quality, including applications in the automotive, commercial, contract manufacturing, design/engineering facilities and industrial marketplaces,” said Bob Grenke, product manager, Molex. For marine instrumentation manufacturing, it is an ideal tool due to its portability. “Many of the marine manufacturing facilities have large factory floor footprints with multiple departments responsible for ensuring quality. Multiple stationary pull force testers could be required; this portable tool can allow marine manufacturers the ability to reduce their capital equipment investments for their quality processes with one portable tool,” said Grenke.

The Hand-Held Wire Crimp Pull-Force Tester from Molex comes standard with both a wheel-type clamp featuring multiple slot sizes for wire diameters up to 6.35mm and a clamp-style holder for open-barrel products. The manual hand-cycle lever automatically grips the wire, providing an accurate measurement of the crimp pull strength on a wide range of wire sizes and terminals including crimped, soldered or solderless. It comes with multiple power plugs and a digital output that displays measurement settings in pound force (lbf), kilogram force (kgf) and newton (N), making the Hand-Held Wire Crimp Pull-Force Tester ideal for global use. It is shipped with AC rechargeable adapters for 120 and 230V AC power supplies and a calibration certificate (NIST).

For more information on the Hand-Held Wire Crimp Pull-Force Tester from Molex, please visit www.molex.com/link/handheldpullforcetester.html. To receive information on other Molex products and industry solutions, please sign up for our e-nouncement newsletter.

About Molex Incorporated
Providing more than connectors, Molex delivers complete interconnect solutions for a number of markets including data communications, telecommunications, consumer electronics, industrial, automotive, medical, military and lighting. Established in 1938, the company operates 40 manufacturing locations in 16 countries. The Molex website is http://www.molex.com. Follow us at www.twitter.com/molexconnectors, watch our videos at www.youtube.com/molexconnectors, connect with us at www.facebook.com/molexconnectors and read our blog at www.connector.com.

Companies Website:
http://www.molex.com

Molex News Release

• Molex| ML-XT™ Sealed Connection System

  2015/08/14Molex  Passive / Connections / mechanical parts

• Molex and Newly-Acquired Oplink to Demonstrate Innovative Transmission and Transport Solutions at OFC 2015

  2015/04/21Molex  Company / Market Trends

• Impel™ Backplane Connector and Cable Assembly System

  2015/04/21Molex  Passive / Connections / mechanical parts

• Molex FPC Connectors, 0.30mm Pitch, SMT, Dual Contact, Easy-On™ BackFlip™ Actuator

  2015/03/24Molex  Passive / Connections / mechanical parts

• Molex | SlimStack™ SSB6 Board-to-Board Connectors, SMT, 0.35mm Pitch, 0.60mm Height, 2.00mm Width, Revision 1

  2015/02/13Molex  Passive / Connections / mechanical parts

Related News Release

• Bourns’ New AEC-Q200 Compliant, Automotive-Grade Thin Film Chip Resistors Offer Higher Resistance Tolerance Accuracy and TCR

  2024/10/03  Bourns  Passive / Connections / mechanical parts

• Bourns Announces AEC-Q200 Compliant Gas Discharge Tube Series for Enhanced Reliability in Demanding Environmental Applications

  2024/10/03  Bourns  Passive / Connections / mechanical parts

• Bourns Continues to Expand its Line of AEC-Q200 Compliant, Automotive Grade BMS Signal Transformers

  2024/10/03  Bourns  Passive / Connections / mechanical parts

• Bourns Introduces AEC-Q200 Compliant Automotive Grade Chip Inductor Series as Space-Saving Solution for Power over Coax Circuits

  2024/10/03  Bourns  Passive / Connections / mechanical parts

• Bourns Unveils Second-generation AEC-Q200 Compliant, Automotive Grade High Creepage/Clearance Distance Isolation Power Transformers

  2024/10/03  Bourns  Passive / Connections / mechanical parts