New Products Compliant with JEDEC e・MMC™ Version 5.0

 

31 Oct, 2013

 

TOKYO—Toshiba Corporation (TOKYO: 6502) today announced the launch of new embedded NAND flash memory modules integrating NAND chips fabricated with 19nm second generation process technology. The module is fully compliant with the latest e•MMCTM [1] standard, and is designed for application in a wide range of digital consumer products, including smartphones, tablet PCs and digital video cameras. Mass production will start from the end of November.

Demand continues to grow for large density NAND flash memory chips that can support high resolution video and deliver enhanced storage. This is particularly true in the area of embedded memories with a controller function, which minimize development requirements and ease integration into system designs. Toshiba is meeting this demand by reinforcing its line-up of high density memory products.

 

The company’s new 32-gigabyte (GB) embedded device integrates four 64Gbit (equal to 8GB) NAND chips fabricated with Toshiba's cutting-edge 19nm second generation process technology and a dedicated controller into a small package measuring only 11.5 x 13 x 1.0mm. It is compliant with JEDEC e・MMCTM Version 5.0, published by JEDEC in September, and achieves a high read/write performance by applying the new HS400 high speed interface standard.

Toshiba will bring the NAND chips to a line-up of single-package embedded NAND flash memories in densities from 4GB to 128GB. All will integrate a controller to manage basic control functions for NAND applications.

 

New Product Line-up

Following 16GB and 32GB products, Toshiba will release 4GB, 8GB, 64GB and 128GB products in turn.

 

Key Features

1.   The JEDEC e•MMCTM V5.0 compliant interface handles essential functions, including writing block management, error correction and driver software. It simplifies system development, allowing manufacturers to minimize development costs and speed up time to market for new and upgraded products.

 

2.    Embedded in a system, the 128GB module can record up to 2,222 hours of music at a 128Kbps bit rate, 16.6 hours of full spec high definition video and 38.4 hours of standard definition video[2].

 

3.    The new products apply NAND flash memory chips fabricated with leading-edge 19nm second generation process technology.

 

4.    The new products are sealed in a small FBGA package measuring just 11.5 x 13mm and has a signal layout compliant with the JEDEC e•MMCTM V5.0.

 

Key Specifications

Note:

[1] e•MMCTM is a trademark and a product category for a class of embedded memory products built to the JEDEC e•MMCTM Standard specification.

[2]   HD and SD are calculated at average bit rates of 17Mbps and 7Mbps, respectively.

 

Information in the press releases, including product prices and specifications, content of services and contact information, is current on the date of the press announcement, but is subject to change without prior notice.

 

 

 

Toshiba Corporation- Semiconductor and Storage Products Company　Website＞

 

http://www.semicon.toshiba.co.jp/eng/index.html?mm=cp1031&no=03

 

 

Visit Chip1Stop Chinese site
Visit Chip1Stop Korean site
Visit Chip1Stop English site
Visit Chip1Stop German site

기업 HP:
http://www.semicon.toshiba.co.jp/eng/index.html?mm=cp1031&no=03

Toshiba 의 뉴스 릴리스

• Toshiba Releases High-Speed Response, Full Input/Output Range CMOS Dual Comparator Suitable for Overcurrent Detection in Industrial Equipment

  2025/12/25Toshiba  Analog

• Toshiba Releases Lens-Reduction Type CCD Linear Image Sensor for High-Speed Data Readouts by Image Inspection Equipment

  2025/12/23Toshiba  Sensor

• Toshiba Releases 40V Electronic Fuses (eFuse ICs) for Industrial and Consumer Applications

  2025/12/11Toshiba  Power Supply

• Toshiba Launches Dual-Channel Standard Digital Isolators that Contribute to Stable High-Speed Isolated Data Transmission in Industrial Equipment

  2025/10/29Toshiba  Equipment and control components

• Toshiba Launches 100V N-Channel Power MOSFET with Its Latest Generation Process Technology[1] to Improve Efficiency in Switched-Mode Power Supplies for Industrial Equipment

  2025/09/26Toshiba  Power Supply

관련 뉴스 릴리스

• STMicroelectronics scales STM32 microprocessors for cost-efficient, low-power, and flexible performance

  2026/01/14  STMicroelectronics  Processor/Memory

• Winbond Launches 8Gb DDR4 DRAM Built on Advanced 16nm Process Technology for Industrial and Embedded Applications

  2025/12/10  Winbond Electronics  Processor/Memory

• STMicroelectronics releases STM32MP23 microprocessors featured for performance and economy and extends support for OpenSTLinux releases

  2025/04/16  STMicroelectronics  Processor/Memory

• New Serial EEPROM family features unique ID for identification, traceability and sustainability

  2025/04/10  STMicroelectronics  Processor/Memory

• Quobly Forges Strategic Collaboration with STMicroelectronics to Accelerate its Quantum Processor Manufacturing for Large-Scale Quantum Computing Solutions

  2024/12/24  STMicroelectronics  Processor/Memory