December 15, 2015

TOKYO– Toshiba Corporation (TOKYO: 6502) today announced the launch of "TB9044FNG", a general-purpose system power IC with multiple outputs achieving functional safety[1] for automotive applications. Sample shipments start today, with the mass production scheduled to start in October, 2017.

More and more safety-critical automotive systems, such as electric power steering (EPS) and braking, are required to meet the requirements of ASIL-D[2], the highest automotive safety integrity level prescribed in the ISO 26262 functional safety standards.

The new IC integrates various failure detection functions, such as high-voltage and low-voltage detection and overheat detection of power supply circuit, to monitor against the IC’s own failure, and a watchdog timer to monitor failure detection of the external microcomputer. An initial diagnosis circuit to detect latent faults in the failure detection circuits is also incorporated to secure higher functional safety.

Toshiba has also carried out a range of functional safety analyses to simulate system failures and will provide customers with documentation, such as functional safety FMEDA[3], to support overall safety analysis and design.

Key Features

■Various built-in monitoring circuits for functional safety

・Low-voltage detection circuit for battery power supply

・High-voltage detection circuit for DC-DC converter (6V)

・High-voltage / low-voltage detection circuit for series power supply (5V)

・Overheat detection circuit

・Oscillator frequency monitoring circuit

・Watchdog timer circuit monitoring the external MCU

■Diagnostic circuit for failure detection circuits for functional safety

A built-in diagnostic circuit in the failure-detection circuit detects any latent faults.

■Built-in buck-boost DC-DC converter

The IC generates 6V output from a high efficiency buck-boost DC-DC converter.

In consideration of voltage drop after idling reduction, the low side operating voltage range is improved down to 2.7V (min.) with battery operation.

■Built-in 4 series power supply[4] circuits (4 outputs)

The IC incorporates four series power supply circuits receiving the 6V input generated by the DC-DC converter.
It also incorporates a circuit with a 5V constant voltage (current capacity is 400mA) for the microcomputer, and three circuits with 5V constant voltage output (current capacity is 100mA) for sensors and other interfaces. Each of them can output a voltage independently.

■Selectable operation for failure detections

Customers can set the system to respond to detected failures in one of two ways, using the SPI [5] communication input setting. One setting outputs a reset signal to the system; the other provides notification of the abnormal operation to the system. Selection can be made according to the customer’s application or system.

Main Specifications　

 

 

Note1: Functional-safety-based standards seek to minimize risk resulting from system failures. ISO26262 certification recognizes that a company's processes or products for electrical and electronic (E/E) systems for car applications meet the stringent criteria specified in the standard and provides third parties with an independent means of assessing the capabilities of a potential supplier.

Note2: ASIL: Automotive Safety Integrity Level

Note3: FMEDA：Failure Modes Effects and Diagnostics Analysis

Note4: Series power supply: The DC power supply circuit in which a voltage control element was connected to a load in series.

Note5: SPI：Serial Peripheral Interface

For further information about Toshiba's System Power Supply ICs, please visit:

http://toshiba.semicon-storage.com/ap-en/product/automotive/powersupply.html?mm=cp151216&no=03

*Information in this document, including product prices and specifications, content of services and contact information, is current on the date of the announcement but is subject to change without prior notice.

Toshiba Corporation- Semiconductor and Storage Products Company　Website＞

http://toshiba.semicon-storage.com/ap-en?mm=cp151216&no=04

 

 

Visit Chip1Stop Chinese site
Visit Chip1Stop Korean site
Visit Chip1Stop English site
Visit Chip1Stop German site

Companies Website:
http://toshiba.semicon-storage.com/ap-en?mm=cp151216&no=04

Toshiba News Release

• Toshiba Starts Test-Sample Shipments of a Bare Die 1200V SiC MOSFET with Low On-Resistance and High Reliability, for Use in Automotive Traction Inverters

  2024/11/13Toshiba  Automotive

• Toshiba Starts Sample Shipments of Gate Driver IC for Three-Phase Brushless DC Motors in Diverse Automotive Applications

  2024/11/01Toshiba  Automotive

• Toshiba Releases Automotive Photorelay with Output Withstand Voltage of 900V, Housed in a Small Package

  2024/10/28Toshiba  Automotive

• Toshiba’s 1200V Additions to its Lineup of Third-Generation SiC Schottky Barrier Diodes Will Contribute to High Efficiency in Industrial Power Equipment

  2024/09/26Toshiba  Power Supply

• Toshiba Is Sampling an Automotive CXPI Responder Interface IC that Contributes to Shorter Software Development Times

  2024/09/05Toshiba  Automotive

Related News Release

• Miniature encapsulated AC/DCs have extended specifications

  2024/11/28  Recom  Power Supply

• STMicroelectronics’ unveils new STSPIN32G0 series of motor drivers for industrial applications and home appliances

  2024/11/18  STMicroelectronics  Power Supply

• SMD Power Modules Provide Flexible Gate Drive Bias Voltages

  2024/10/31  Recom  Power Supply

• STMicroelectronics reveals flexible, future-proof smart-meter communication solution for the energy transition

  2024/10/28  STMicroelectronics  Power Supply

• Bourns Releases Riedon™ Modular Fuse Blocks that Meet Class-T and ANL Requirements

  2024/10/08  Bourns  Power Supply