Chip One Stop - Shopping Site for Electronic Components and Semiconductors
Menu
South Africa
Change
English
SELECT YOUR LANGUAGE
USD
SELECT YOUR CURRENCY FOR DISPLAY
About Preferential Rank / Discount

Current price of Item(s) have been applied below.
 


・Preferential Rank and Discount rate will be applied according to your usage of our web service.
・Discount is only applicable to orders from chip1stop web site.
・Discounts may not be applicable to all products and may be subject to MOQ.
・Please contact your representative for details of Preferential Rank.
・No other coupons may be used in conjunction with this discount.

News Center

TI introduces integrated triple-output synchronous buck converters with smaller footprint and higher efficiency

2014/08/13Texas Instruments  Analog

 

Recommended alternative parts
 TPS65262   - The device has SIMILAR FUNCTIONALITY but is not functionally equivalent to the compared device.   4.5V to 18V Input, 3A/1A/1A Triple Synchronous Step-Down Converter with 200mA/100mA Dual LDOs


Description

The TPS65261, TPS65261-1 is a monolithic triple synchronous step-down (buck) converter with 3A/2A/2A output currents. A wide 4.5V to 18V input supply voltage range encompasses the most intermediate bus voltages operating off 5V, 9V, 12V or 15V power bus. The converter, with constant frequency peak current mode, is designed to simplify its application while giving designers options to optimize the system according to targeted applications. The switching frequency of the converters can be adjusted from 250kHz to 2MHz with an external resistor. The 180° out-of-phase operation between Buck1 and Buck2, 3 (Buck2 and 3 run in phase) minimizes the input filter requirements.


The TPS65261, TPS65261-1 features an automatic power sequence with connecting MODE pin to V7V and configuring EN1/2/3 pins. The device also features an open drain RESET signal to monitor power down.


At light load, the TPS65261 automatically operates in pulse skipping mode (PSM) and the TPS65261-1 operates in force continuous current mode (FCC). PSM mode provides high efficiency by reducing switching losses at light loads and FCC mode reduces noise susceptibility and RF interference.


The device features overvoltage protection, overcurrent and short-circuit protection and over-temperature protection. A power good pin asserts when any output voltages are out of regulation.


Features


Operating Input Supply Voltage Range
 (4.5 V to 18 V)
Feedback Reference Voltage 0.6V±1%
Maximum Continuous Output Current 3A/2A/2A
Adjustable Clock Frequency from 250kHz to 2MHz
Dedicated Enable and Soft Start Pins for Each Buck
Automatic Power-up/Power-down Sequence
Pulse Skipping Mode (PSM) at Light Load (TPS65261 only)
Output Voltage Power Good Indicator
Input Voltage Power Failure Indicator
Thermal Overloading Protection


Visit Chip1Stop Chinese site
Visit Chip1Stop Korean site
Visit Chip1Stop English site
Visit Chip1Stop German site


Companies Website:
http://www.ti.com/

Texas Instruments News Release

Related News Release