Nucleo Series
mbed development environment responding & Arduino compatible development board
that quickly realize creation of prototypes based on Cortex-M microcomputer

Using the STM32 Nucleo Board allows you to prototype easily and allows anyone to try new ideas in short amounts of time. The STM32 Nucleo Board has a common Arduino connector and ST Morpho header and can easily be expanded using a number of dedicated application hardware add-ons. The STM32 Nucleo board has built-in ST-LINK/V2-1 debugger and programmer. The STM32 Nucleo board has the STM32 software HAL library and various software examples and it seamlessly works with the wide development environment of IAR EWARM, Keil MDK-ARM, mbed, and GCC based IDE. Users of the STM32 Nucleo board can access the mbed online resources (compiler, C/C++ SDK, and developer community) at www.mbed.org for free and can build complete applications in just minutes.

X-Nucleo Series
STM32 Nucleo Expansion Board/X – Nucleo Series

The STM32 Nucleo Expansion Board meets all design requirements.

These expansion boards have a common pin assignment for connecting with the microcomputer.

Each expansion board is supported by an STM32 based software module. Combined with the STM32 Nuclio board, a unified and adaptive approach for application development, prototyping, and product evaluation is made possible.

One-chip solution for low power consumption sensor based IoT system design 1. Realize complete system design with PSoC Creator 2. Simplified BLE protocol stack and profile configuration  with easy-to-use BLE Component 3. Simplifying RF board design by integrating balun 4. Equipped with programmable AFE and digital logic  along with CapSense, ARM Cortex-M0 CPU and BLE wireless technology 5. Provides user-friendly power consumption modes with five flexibles

Equipped with multiple sensors, it is ideal for IoT application design Can easily customize various sensors The PSoC Analog Coprocessor has the following analog sensors: PIR motion sensor Humidity sensor Thermistor Inductive proximity sensor Ambient light sensor Form factor compatible with Arduino® shield 1 board On-chip system debugging made possible with PSoC5 programmer and debugger Equipped with 1Mb serial F-RAM2 for nonvolatile data storage outside chip

An ultra-low power consumption energy harvesting BLE solution designed ultra-compact and solar power wireless sensor The CYALKIT-E02 Solar-Powered BLE Sensor Beacon Reference Design Kit (RDK) is designed to quickly design ultra-small solar power driven IoT devices for BLE wireless communication. This RDK includes a Solar BLE Sensor and BLE-USB Bridge and a Debug Board. The Solar BLE Sensor consists of Cypress’s Energy Harvesting Power Management IC (PMIC), S6AE103A and EZ-BLE™PRoC™ Module (CYBLE-022001-00), designed to operate without a battery, it harvests energy from ambient light.

iMOTION™ for motor control solutions

Target ideal applications are for household electronics, air conditioning systems, pumps, ventilators, and multicopters (drones). Currently, the iMOTION™ solution is already used in energy-efficient and cost-effective BLDC motor controls in more than 65 million units such as air-conditioning systems and multicopters around the world. Technologies and variation details on the iMOTION™ solution platform and its modular application design kit can be found in Digital Motor Controller (iMOTION™) and iMOTION™Modular Application Design Kit.

3D Magnetic Sensor

TLV493D-A1B6 2 GO KIT The 3D Magnetic Sensor 2GO is a low-cost evaluation board equipped with a magnetic sensor for 3 dimensional measurement combined with ARM®Cortex™-M0 CPU. The 3D Magnetic Sensor 2GO is a complete set of onboard devices including an onboard debugger. In addition to the 2GO kit, we also include a joystick and a rotary nob for easier evaluation all for a great price. Download the 2GO kit GUI (Graphic User Interface) to use for free here.

Magnetic Current Sensor

TLI4970050 2 GO KIT The Current Sensor 2GO is a low-cost evaluation board combining current sensor and ARM® Cortex™-M0 CPU. Current Sensor 2Go is a complete set of onboard devices including an onboard debugger. Download the 2GO kit GUI (Graphic User Interface) to use for free here. It is a precision current sensor for industrial applications based on Infineon’s Hall technology backed by achievement.This product, which adopts the coreless concept, has significantly reduced mounting area over existing solutions.It is an easy-to-use full digital sensor with no need for an external calibration, external components such as A/D converters and OP amplifiers, or reference voltage.This greatly simplifies the entire mounting process and can dramatically reduce PCB space and cost.It is ideal for applications such as solar inverters, charging devices, power supply devices, as well as control of electric drive devices and power saving LED lighting devices.