February 12, 2014

 

Tokyo – Toshiba Corporation (TOKYO: 6502) today announced that it has developed an eXtremely Low Leakage 65nm SRAM (XLL SRAM) suitable for back-up RAM in low power MCU that achieves a fast wake-up time from a deep sleep mode.

Toshiba presented this development at the 2014 IEEE International Solid-State Circuits Conference in San Francisco, California, on February 11.

There is strong demand for long battery discharge times in low power systems, including wearable devices, healthcare tools and smart meter. Although there are many challenges to reduce power of MCU used in these systems, with advances in the process generation, increasing of leakage current becomes problem as well as active power consumption. Reducing leakage current in RAM, which retains data during stand-by, is particularly important.

A typical MCU reduces power dissipation with a deep sleep mode, where stand-by current is under 1µA. However, this makes it impossible for typical SRAM to retain data, as SRAM require a stand-by current much higher than 1µA. As a result, data reloading takes a long time when the system wakes up from a deep-sleep mode. Use of FRAM as back-up RAM eliminates this reload problem, but FRAM is much slower and consumes more active power than SRAM and also needs more process cost.

Toshiba has developed an eXtremely Low Leakage SRAM (XLL SRAM) that has a leakage rate a thousand times lower than that of conventional SRAM; 27fA leakage current per bit when fabricated in 65nm process. This level is lower than that found in published data for SRAM beyond 65nm technology. The new SRAM can retain data for over 10 years with a single battery charge, in a back-up memory with a capacity of around 100Kbyte.

MOSFET fabricated with recent process technology has higher gate leakage, gate induced drain leakage (GIDL) and channel leakage. Toshiba has developed a low leakage transistor with thick gate oxide, long channel length and optimum source drain diffusion profile to reduce these leakage factors, and adopt it in the SRAM memory cell. The company has developed several innovative leakage reduction circuits. One is a source bias circuit to apply reverse back-bias to NMOS of memory cell, and another cuts off the supply voltage to peripheral circuits during data retention.

The low leakage transistor is larger than conventional transistor, increasing the overall cell area. Toshiba secured a 20% reduction in cell size compared to area designed by original design rule of this device under the condition of 1.2V supply voltage. Generally, large transistor circuits have higher active power dissipation. Toshiba has suppressed this by adopting "Quarter Array Activation Scheme (QAAS)" and "Charge Shared Hierarchical BitLine (CSHBL)" power reduction circuits.

An SRAM with a 7ns read access time is fast enough to be used as working RAM in low power MCU and for use as back-up RAM in deep-sleep mode because of its extremely low leakage current. As the system eliminates data reloading, the wake-up time from deep sleep mode is boosted.

Toshiba plans to use the SRAM in a product released in 2014, and expects to see wide use in coming battery-driven products.

 

 

Information in this document, including product prices and specifications, content of services and contact information, is current on the date of the announcement but is subject to change without prior notice.

 

 

Toshiba Corporation- Semiconductor and Storage Products Company　Website＞
http://www.semicon.toshiba.co.jp/eng/index.html?mm=cp0212&no=06

 

 

 

Visit Chip1Stop Chinese site
Visit Chip1Stop Korean site
Visit Chip1Stop English site
Visit Chip1Stop German site

Companies Website:
http://www.semicon.toshiba.co.jp/eng/index.html?mm=cp0212&no=06

Toshiba News Release

• Toshiba Starts Test-Sample Shipments of a Bare Die 1200V SiC MOSFET with Low On-Resistance and High Reliability, for Use in Automotive Traction Inverters

  2024/11/13Toshiba  Automotive

• Toshiba Starts Sample Shipments of Gate Driver IC for Three-Phase Brushless DC Motors in Diverse Automotive Applications

  2024/11/01Toshiba  Automotive

• Toshiba Releases Automotive Photorelay with Output Withstand Voltage of 900V, Housed in a Small Package

  2024/10/28Toshiba  Automotive

• Toshiba’s 1200V Additions to its Lineup of Third-Generation SiC Schottky Barrier Diodes Will Contribute to High Efficiency in Industrial Power Equipment

  2024/09/26Toshiba  Power Supply

• Toshiba Is Sampling an Automotive CXPI Responder Interface IC that Contributes to Shorter Software Development Times

  2024/09/05Toshiba  Automotive

Related News Release

• Winbond’s LPDDR4/4X: A Green Solution for the Automotive Industry

  2024/11/29  Winbond Electronics  Processor/Memory

• STMicroelectronics reveals Page EEPROM two-in-one memory to boost smart-edge performance and efficiency

  2024/10/08  STMicroelectronics  Processor/Memory

• Winbond has unveiled its latest 1Gb QspiNAND for Wearable and Low-Power IoT Devices.

  2024/08/08  Winbond Electronics  Processor/Memory

• STMicroelectronics powers up the intelligent edge with second-generation STM32 microprocessors, bringing performance boost and industrial resilience

  2024/03/18  STMicroelectronics  Processor/Memory

• Winbond Introduces Innovative CUBE Architecture for Powerful Edge AI Devices

  2023/09/27  Winbond Electronics  Processor/Memory